XR AA-105 activated alumina fluoride removal is an adsorbent used to adsorb fluoride and arsenic in the water. It could highly remove fluoride and arsenic in the water. It is our latest advancement for removing fluoride from drinking water, and is a very effective alternative to the commonly used Activated Alumina media.
XR105 Activated alumina is the only filter material specifically designed to remove fluoride and arsenic from water. A ceramic compound made of aluminum oxide with a very high surface-area-to-weight ratio, It has a very high capacity for fluoride adsorption. Most municipal water supplies add 2 ppm (parts per million) of fluoride. It can reduce fluoride concentrations to below .1 ppm, or down to 99% of the normal fluoridated water level. The defluornation capacity of XR105 activated alumina adsorbent could reach 5mg/h. And it can be regenerated after heated in the temperature about 175°c to 315°c to removing water once it's reached saturation.
● Uniform size
● high surface area
● High mechanical strength and wear resistance
● High pore volume and high adsorption
Crushing Strength (N/Particle)
● Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied..
● It should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Super sack/Jumbo bag
25 kg/ 55 lb
150 kg/ 330 lb
1000kg/ 2200 lb
Q: We want to get some samples ?
A: ok. 1kg samples are in free supply.
Q: What's your quality control system ?
A: For every batch, we test 3 times during production in our lab, and we will issue test report for final activated alumina products.
Q: What size is appropriate for activated alumina fluoride removal
A: The recommended size is 1-2mm and 2-3mm.
Q：does activated alumina remove fluoride？
A： Yes. The application result could state activated alumina could remove fluoride efficiently.