Activated Alumina Producers

- Mar 14, 2018-

Zibo Xiangrun and Shandong Bairui professionally produce activated alumina. As activated alumina producer, we have a series of activated alumina products.

General Aluminas 
XR AA-101 activated alumina desiccant
XR AA-132 activated alumina for PTA

Chloride/TBC Purification

●XR CL-104, CL-104E


Peroxide Purification

●XR AA-107

SRU Claus Catalysts

●-Activated alumina catalysts

●-Promoted alumina catalysts

●-Titania catalysts

●-Alumina/Titania composite catalysts

●-Bed supports

Water treatment/fluoride removal

●XR AA-105

Hydrocarbon purification
XR AA-104
XR AA-125

KMNO4 impregnated with activated alumina


Catalyst carrier

Large pore volume activated alumina

The applications for activated alumina as activated alumina producers are used in:

●Activated alumina for compressed air dryers

●water purificatactivated alumina.jpgion to remove fluoride, arsenic and selenium

●removal of degradation acids from transformer oils, lubricating oils, and  refrigerants

●natural gas drying

●liquefied natural gas drying

●activated alumina for air Filtration



●Purification of Process Liquids and Gases

●pH Balance

As professional Activated alumina producer, we offer the systematical technical instruments and suggestion. 

Regeneration of activated alumina

●In the drying of activated alumina, regeneration of activated alumina is necessary. The heating and desorption processes include heating, rinsing and cooling in three steps. The higher the heating temperature, the more complete the desorption regeneration. General heating regeneration temperature is about 350 ℃. The temperature of the activated alumina tower is generally raised to 280℃ for 4 hours. Heating rate of about 50 ℃ per hour. After the regeneration of the active alumina bed must be cooled before the adsorption operation, with the cooling gas to wash the bed, the gas should also be used to try not to contain water, cold gas flow and adsorption cycle of the same direction. When activated alumina is used for liquids such as propylene drying, it is necessary to first drive the liquid of the activated alumina bed at the time of regeneration, without any dead ends. Otherwise the residual liquid will react or carbonize upon heating, which will seriously affect the efficiency and operating life of the adsorption cycle.

●If the activated alumina has good quality, it will improve the life of activated alumina. Certainly, whatever bad or good, you should use desiccant regeneration for future application. But Good quality activated alumina performance could improve the life and drying situation. So please purchase activated alumina from standard activated alumina factory. Trust our company could offer you the best warranty.