Various grade activated alumina available for the international condition.
7* 14 mesh(2.0mm), 1/8” (3-4), 3/16”(4-5mm), 1/4”(6-7mm), 3-5mm, 4-6mm, 5-7mm, 6-8mm, 1-2mm, 2-3mm, and size decided by clients.
Zibo Xiangrun could manufacture 1-20mm activated alumina. 10-20mm activated alumina is our super products.
Characteristics of Active alumina adsorbent:
●High bulk density
●Uniform size
●High mechanical strength and wear resistance
●low dust and attrition loss
●High pore volume and high adsorption
As a model produced by long development production technology, XR101 activated alumina ball is a water adsorbent for compressed air for exclusive use. Especially, it has excellent wear resistance, therefore it causes little dust in compressed air.
With large surface area, XR101 activated alumina balls adsorb higher amount of water and fast desorption during regeneration. Its life is longer, and it has a remarkable capacity to regenerate.
Series of Activated alumina
1. Activated alumina desiccant
2. Activated alumina for air dryers
3. Activated alumina for air seperation
4. Activated alumina for removal of chloride
5. Activated alumina for removal of COS
6. Activated alumina used in polymer, polyurethane, and polyethylene purification
7. Activated alumina for water treatment
8. Activated alumina used in hydrogen peroxide
9. Activated Alumina For Defluorination In Hydrofluoric Alkylation
10. Specialized Activated Alumina for PTA
11. Activated alumina impregnated with Sodium permanganate
12. Promoted activated alumina
13. Bed supports
14.Potassium permanagante with activated alumina
Parameter of activate alumina adsorbent:
Item | Unit | Technical requirement | |||
Particle size | mm | 3-5 | 4-6 | 5-7 | 6-8 |
AL2O3 | % | ≥93 | ≥93 | ≥93 | ≥93 |
SiO2 | % | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.10 |
Fe2O3 | % | ≤0.04 | ≤0.04 | ≤0.04 | ≤0.04 |
Na2O | % | ≤0.40 | ≤0.40 | ≤0.40 | ≤0.40 |
Attrition Loss | % | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 |
Bulk density | g/ml | ≥0.75 | ≥0.75 | ≥0.75 | ≥0.75 |
Surface area | ㎡/g | ≥320 | ≥320 | ≥320 | ≥280 |
Pore Volume | ml/g | ≥0.45 | ≥0.45 | ≥0.45 | ≥0.45 |
Water absorption | % | ≥55 | ≥55 | ≥55 | ≥55 |
Crushing Strength (N/Particle) | N/particle | ≥180 | ≥200 | ≥260 | ≥350 |
Application of Activate alumina:XR101 activated alumina is used for deep drying of gas or liquid phase of petrochemicals, air separation adsorption and adsorption drying by automatic instruments.
Storage of active alumina
●Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied..
●It should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Package of Activated alumina:
Type | Plastic bag | Drum | Drum | Super sack/Jumbo bag |
Bead | 25kg/55lb | 25 kg/ 55 lb | 150 kg/ 330 lb | 750kg/1650lb 900kg/1980lb 1000kg/ 2200 lb |
FAQ
Q: What grade of activated alumina you produce?
A: 7* 14 mesh, 1/8” (3-4), 3/16”(4-5mm), 1/4”(6-7mm), 3-5mm, 4-6mm, 5-7mm, 6-8mm, 1-2mm, 2-3mm, 8-10mm, 10-12mm, 12-14mm are popular activated alumina. We also could do the size as clients requirement, like 0.5-1mm, 1-1.5mm, 3.5-4.5mm, and other special activated alumina. You could contact with our salesman to confirm the required size, then we will do it as your requirement.
Q: What time is storage life of activated alumina?
A: Usually, it is about 2 years in good storage. Before using, if the condition permit, please heat them at about 350℃..
Q:Do you have activated alumina MSDS?
A: Certainly, please ask our salesman to get a copy. Thanks!